HOME / other

All In One Solar Street Lights Company

all in one solar street lights company

Starlight is a all-in-one solar street lights company
Starlight understands the critical role of security lighting to help protect facilities, people and assets. Our Solar powered lighting Solutions combine leading fixture, panel and controller technologies to help you:
• Easily add primary or back-up lighting to secure your site
• Deploy reliable illumination anywhere without requiring complex or expensive grid-connection
• Protect your lighting systems from vandals

Requiring access only to the power of the sun, our wireless systems offer a simple and cost-effective alternative for illuminating fences, walls and borders that can be located a long distance from established electrical and communications equipment. We’ve combined our proprietary Solar Eterno® Energy Management System with state of the art Cree LED luminaires to offer unparalleled reliability and excellent lumens-per-watt brightness throughout the year and in all weather conditions. Our tamper resistant designs also have no external cabling and offer high-mounted Solar engines and controllers to proctect the light from all but the most persistent vandal. Each Solar light acts independently of others in a network so tampering with one light will NEVER impact other lights in a system.

Starlight has you covered for increased security and safety. Browse our product list to learn more.

Solar street light controller

Solar street light controller

Solar controller is to play in the entire solar street lights in a co-ordinate control of a charge and discharge management of the electronic controller. Daytime sunlight charging. Perceive light. Check to automatically turn on lights in the evening after dark. And detecting the illumination lights after open. After the morning sunshine detected automatically turn off the lights.

Guarantee constant current output
Because LED lights to their needs through technical means or constant current limit, otherwise it could not work properly. General LED lights The approach is usually applied to a drive power LED constant current, but it was needed to bring the power loss, so add more independent drive power consumption, so this approach is not desirable.
Control output period
Solar controller can set the time, to set a good time start output current starts to work.
Adjust output power in the solar street light applications, for power regulation. Adjust the power to control the brightness of LED lights, such as early morning lights adjusted to 30W, late adjusted to 15W energy-saving, so lock current only meet the lighting needs at night, but also saves batteries, solar panels overall configuration and budget, you can also greatly extend the effective life of the LED lamp.

How to choose solar street light controller
1. should choose a lower power consumption of the controller, the controller work 24 hours a day, as they own large power consumption, it will consume some energy, the best choice in power consumption below 1 mA controller.
2. To select high efficiency charge controller with MCT charge mode controller can automatically track the maximum current of the battery plate, especially in the winter period or lowlight, MCT charge mode efficiency of around 20% higher than the other.
3. should be selected with two-way power adjustment controller, the controller has a power adjustment has been widely promoted, few pedestrians at night time can be automatically shut down one or two lighting, saving electricity, you can also adjust the power for LED lights . In addition to selecting more energy-saving features, but also should pay attention to the battery and other components of the controller protection features, such as having a trickle charge mode controller can well protect the battery, increasing battery life, the other to set the controller undervoltage protection value, try to adjust voltage protection value in ≥ 11.1V, to prevent battery over-discharge.

How to install solar street lights

How to install solar street lights
Solar lights, is now the most widely used lighting roads we use, to our travel at night to provide a very good help, that our solar street light installation step is how it? Today to introduce solar street lighting installation methods and procedures for your understanding.

Solar Street Light Installation
Solar street light installation – Foundation pouring

Ascertaining the position of the lamp; geological prospecting, if the surface is 1 m 2 are soft soil, the depth of the excavation should be deepened; the same time to confirm the location of the excavation the following no other facilities (such as cables, pipes, etc.), the top of the street no longer shade object, or to the appropriate replacement position. In the location of the lamp stand aside (excavation) standard 1 m3 pit; be positioned to be buried pouring. Embedded parts placed in a square hole in the middle, PVC pipe threading one end of the embedded parts in the middle, on the other end of the battery storage.

Keep the embedded parts, the original foundation and the ground at the same level (or screw top with the original ground at the same level, according to the site needs), there should be parallel with the side of the road; this can only be assured after the erection of poles and correct not skewed. Then fixed with C20 concrete pouring, pouring process either disable vibrator vibration, ensure the overall compactness, robustness. Construction is completed, clean the positioning plate residual sludge, waste oil and clean the bolt impurities. Concrete solidification process, to regularly water conservation; concrete to be completely solidified (usually more than 72 hours) to be installed chandeliers.

Solar street light installation – installation of a solar cell module

The output of the solar panel positive and negative measures shall be taken before connecting the controller to avoid short circuit; solar cell module is connected to the stand solid and reliable; output should avoid bare wire assembly, with tie pitched; toward the battery assembly to be heading south to the compass points to prevail.

Solar street light installation – Battery Installation

When the battery is placed in the control box to be gently, to prevent smashed the control box; cables between the battery must be bolted pressure on the battery terminals and copper pads to enhance the conductivity; output line connected to the battery after the ban under any circumstances short, to avoid damage to the battery; to be through PVC pipe threading controller battery output line and poles inside the linked; after the completion of the above, check the wiring on the controller side to prevent short circuits. After normal shut the door of the control box.

Solar street light installation – lighting installation

That various parts of the fixed components: solar panels fixed on the solar panel bracket, lamp fixed to the pick arm bracket and then pick arm is fixed to the main lever and threading the cable to the control box (battery box). Before lifting pole, check whether all parts of fasteners firmly lamp installation is correct, whether the source is working properly. Then whether simple debugging system is working properly; loosen the solar panels on the controller cable, light work; cable connect solar panels, lights out; carefully observe changes in the controller for each indicator; everything is normal before lifting installation. The main pole lifting, attention to safety precautions; fastening screws absolute good, such as the angle of the sun assembly deviate need to end up fully adjust its orientation toward the sun due south.

The battery into the battery case, in accordance with the technical requirements of the cable connected to the controller; first of battery, connect the load, and then take solar panels; the wiring operation must pay attention to the brightest and the controller on the terminal marked terminals can not be connected wrong, positive and negative polarities can not crash, can not be reversed; otherwise the controller will be damaged. Whether debug system is working properly; loosen the solar panels on the controller cable, lights; at the same time connected to the solar panel cables, lights out; carefully observe the changes on the controller for each indicator; everything is normal, before the seal control box.

Above is to introduce about some of the ways solar street light installation step, and only through the correct installation of our solar street lights get it to work and use, in order to provide us with a bright at night time, but it also requires specialized staff to carry out the installation.

Residential Area

school

Double Stone Town, a residential area in the new rural construction in the first use of solar integrated street Star New Energy Technology Co., Ltd., in charge of the property in the early stage of construction was also considered by traditional lights, but the actual cost is far higher than budgeted costs, and large engineering and very tight schedule, construction will be broken ring original environment. Integrated solar street light has the perfect solution to these problems.

Double Stone Town residential area of one solar street light project basic information is as follows:
Project address: Two Stone Town residential area
Product Supplier: Star New Energy Technology Co., Ltd.
Source: 30W high quality LED light source (life of 50,000 hours)
Pole: 6m overall corrosion galvanized steel poles
Solar panel: 18V / 60W monocrystalline silicon solar panel
Mounting distances: 20-25m
Battery: maintenance-free special solar battery 12.8V / 27AH
The project the perfect solution to the problem residents travel at night, head of residential property to give us a single tariff statistics tell us that the average cost per piece integrated solar lamp lights one can save 50W * 10 / day * 1.2 yuan / kWh = 6 yuan a month is down 180 yuan, 2160 yuan a year, two years to recover the cost of very cost-effective, but also eliminates the changing light bulbs, line maintenance and other expenses. Solar lights integrated security but also for the entire residential area at night to provide security.